InnoDisk FiD 1.8 SATA D150 SSD Standard Temperature
InnoDisk FiD 1.8" SATA D150 SSD is standard 7+15 pin SATA interface could support most of the platform with standard SATA port. InnoDisk SATA D150 SSD operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 120/100MB per second (max).
InnoDisk SATA D150 SSD is also suitable in the industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATA D150 SSD complies with ATA protocol, no additional drivers are required, and the SATA D150 SSD can be configured as a boot device or data storage device.
Key Features
Capacity: 2GB~32GB
Data Transfer Rate: Read 130MB/sec. (max.), Write 125MB/sec. (max.)
Interface: Serial ATA II (3.0Gbps)
Access Time: 0.3ms
Error Correction Function
Built-in ECC corrects up to 8-bit per 512 Byte
Dimension: 69.85 x 50.00 x 9.00 mm (WxLxH)
Operating Temperature Range: Standard Grade: 0°C to +70°C
Storage Temperature Range: Standard: -55°C to +95°C
InnoDisk 2GB 1.8" FiD SATA SSD (Solid State Drive) D150 Series (SLC) (R:40MB/sec | W: 15MB/sec) 0°C ~ +70°C
Product Code: D1ST2-02GJ30AC1DS
InnoDisk 4GB 1.8" FiD SATA SSD (Solid State Drive) D150 Series (SLC) (R:90MB/sec | W: 35MB/sec) 0°C ~ +70°C
Product Code: D1ST2-04GJ30AC1QS
InnoDisk 8GB 1.8" FiD SATA SSD (Solid State Drive) D150 Series (SLC) (R:85MB/sec | W: 70MB/sec) 0°C ~ +70°C
Product Code: D1ST2-08GJ30AC1QS
InnoDisk 16GB 1.8" FiD SATA SSD (Solid State Drive) D150 Series (SLC) (R:130MB/sec | W: 120MB/sec) 0°C ~ +70°C
Product Code: D1ST2-16GJ30AC1QT
InnoDisk 32GB 1.8" FiD SATA SSD (Solid State Drive) D150 Series (SLC) (R:130MB/sec | W: 125MB/sec) 0°C ~ +70°C
Product Code: D1ST2-32GJ30AC1QT