InnoDisk Industrial Grade 2.5" FiD 10000-RS SATA II SSD Extended Temperature
InnoDisk FiD 2.5” SATA10000-RS series supports SATA II standard (3.0Gb/s) interface with good performance and thus performs faster data transfer rate. Sustain read can reach up to 100MB per second (max), and sustain write reach up to 50MB per second (max). Moreover, InnoDisk FiD 2.5” SATA10000-RS is designed for industrial field with 2.5-inch form factor. The SSD have good performance, no latency time and small seek time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5” SATA10000-RS can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoDisk FiD 2.5” SATA10000-RS complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
Key Features
Capacities 1GB, 2GB, 4GB and 8GB
Read / Write speeds up-to 100MB/50MB/sec (Read / Write)
Serial ATA Gen-I and Gen-2 (1.5Gb/s and 3.0Gb/s)
SLC NAND Flash
Dimensions 99.8 x 69.6 x 9.3mm
Operating Temperature -40°C ~ +85°C
InnoDisk 1GB 2.5" SATA SSD (Solid State Drive) FiD 10000-RS Series (SLC) (R:100MB/sec | W:50MB/sec) -40°C to +85°C
Product Code: D2ST-01GT21W1
InnoDisk 2GB 2.5" SATA SSD (Solid State Drive) FiD 10000-RS Series (SLC) (R:100MB/sec | W:50MB/sec) -40°C to +85°C
Product Code: D2ST-02GT21W1
InnoDisk 4GB 2.5" SATA SSD (Solid State Drive) FiD 10000-RS Series (SLC) (R:100MB/sec | W:50MB/sec) -40°C to +85°C
Product Code: D2ST-04GT21W1
InnoDisk 8GB 2.5" SATA SSD (Solid State Drive) FiD 10000-RS Series (SLC) (R:100MB/sec | W:50MB/sec) -40°C to +85°C
Product Code: D2ST-08GT21W1