InnoDisk Industrial Grade 2.5" FiD 10000 SATA II SSD
InnoDisk FiD 2.5” SATA 10000 products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5” SATA 10000 supports SATA II standard (3.0GHz) with high performance. For SLC solution, sustain read is at 160 MB per second (max.), and sustain write is at 140 MB per second (max). InnoDisk FiD 2.5” SATA 10000 uses standard 2.5-inch form factor, which can be used in laptop.
InnoDisk FiD 2.5” SATA 10000 is designed for industrial field. The SSD have good performance, no latency time and small seek time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5” SATA 10000 can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD.
InnoDisk FiD 2.5” SATA 10000 complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
Key Features
Capacities 8GB,16GB, 32GB, 64GB and 128GB
Read / Write speeds up-to 160MB/140MB/sec (Read / Write)
Serial ATA Gen-I and Gen-2 (1.5Gb/s and 3.0Gb/s)
SLC NAND Flash
Dimensions 99.8 x 69.6 x 9.3mm
Operating Temperature 0°C ~ +70°C
InnoDisk 8GB 2.5" SATA SSD (Solid State Drive) FiD 10000 Series (SLC) (R:160MB/sec | W:140MB/sec) 0°C to +70°C
Product Code: D2ST-08GJ13C1
InnoDisk 16GB 2.5" SATA SSD (Solid State Drive) FiD 10000 Series (SLC) (R:160MB/sec | W:140MB/sec) 0°C to +70°C
Product Code: D2ST-16GJ13C1
InnoDisk 32GB 2.5" SATA SSD (Solid State Drive) FiD 10000 Series (SLC) (R:160MB/sec | W:140MB/sec) 0°C to +70°C
Product Code: D2ST-32GJ13C1
InnoDisk 64GB 2.5" SATA SSD (Solid State Drive) FiD 10000 Series (SLC) (R:160MB/sec | W:140MB/sec) 0°C to +70°C
Product Code: D2ST-64GJ13C1
InnoDisk 128GB 2.5" SATA SSD (Solid State Drive) FiD 10000 Series (SLC) (R:160MB/sec | W:140MB/sec) 0°C to +70°C
Product Code: D2ST-A28J13C1